| 414 Scraper Specifications |
The 414 is available as a single unit or can be pulled in tandem. The 414 is the smallest of
the ICON Earthmover line. It was designed with the Contractor in mind, making the 414 a
compact and extremely durable scraper to work behind a large front wheel assist tractor, or
a smaller four wheel/track tractor. Two 23.5X25 tires are standard with a 26.5X25 tire
option. Brakes are also optional.
The 414 is rear lowering with two 5X22 inch cylinders and the gate is controlled by a 6X22
inch cylinder. The 414 is a fixed hinge bit with a roll out eject using a 4X50 inch cylinder.
The machine is equipped with ½ inch hydraulic hoses. Hydraulic operation is two valve
syncro-sequencing.
The 414 weighs 20,600 lbs. Empty and can be shipped two per truck. The machine has a
10 ft. cut and a narrow transport overall width of 10 ft. 11 inches. The length is 27 ft. 6
inches. Overall height is 7 ft. 3 inches and has a max capacity of 14 cubic yards.
The 414 utilizes double wall construction on the sides with 80,000 yield and T-1 high
tensile steel where extra strength is required. Reversible cutting bits are standard along
with a operators site gauge.
The 414 Warranty is for six months from the date of sale, lease, or rental when pulled
behind a rubber track or rubber tire tractor with a maximum 400 engine horsepower. A
push block option can be added. However, due to extreme variables involved with push
loading, ICON will not Warranty damage occurred while pushing.
As with all ICON Scrapers, the machine is delivered from the factory fully assembled with
lube and hydraulic oil, ready for the job site.
the ICON Earthmover line. It was designed with the Contractor in mind, making the 414 a
compact and extremely durable scraper to work behind a large front wheel assist tractor, or
a smaller four wheel/track tractor. Two 23.5X25 tires are standard with a 26.5X25 tire
option. Brakes are also optional.
The 414 is rear lowering with two 5X22 inch cylinders and the gate is controlled by a 6X22
inch cylinder. The 414 is a fixed hinge bit with a roll out eject using a 4X50 inch cylinder.
The machine is equipped with ½ inch hydraulic hoses. Hydraulic operation is two valve
syncro-sequencing.
The 414 weighs 20,600 lbs. Empty and can be shipped two per truck. The machine has a
10 ft. cut and a narrow transport overall width of 10 ft. 11 inches. The length is 27 ft. 6
inches. Overall height is 7 ft. 3 inches and has a max capacity of 14 cubic yards.
The 414 utilizes double wall construction on the sides with 80,000 yield and T-1 high
tensile steel where extra strength is required. Reversible cutting bits are standard along
with a operators site gauge.
The 414 Warranty is for six months from the date of sale, lease, or rental when pulled
behind a rubber track or rubber tire tractor with a maximum 400 engine horsepower. A
push block option can be added. However, due to extreme variables involved with push
loading, ICON will not Warranty damage occurred while pushing.
As with all ICON Scrapers, the machine is delivered from the factory fully assembled with
lube and hydraulic oil, ready for the job site.
……………………………………………………………………………………………… ICON reserves the right to change design, models, specification, and/or pricing without notice or obligation |
 |  |  |  |
